Structural BIM Services

• Ability to leverage multiple opportunities with BIM

  ---

• Parametrics family creation, as well as Revit conversion

  ---

• Seamless communication throughout convergence facilities

  ---

• Knowledge sharing of industry best practices

  ---

• Up to date software training

  ---

Contact Us

View All Services

Our Services

CPM Scheduling
Construction Delay Claims
Staff Augmentation
Construction Management Consulting Services
BIM Modeling
Constructability Review
Value Engineering
Construction Management

HSE Contractors is insured by the following professional liability policies, up to $4,000,000 for our clients’ protection:
General Liability.
Workers Comp

Structural BIM Services

Accurate BIM models that represent structural systems and support design coordination, detailing, and construction planning.

• Concrete, steel, and hybrid framing systems modeled in Revit
• Coordinated with architectural and MEP models for multi-disciplinary projects

HSE Contractors builds structural BIM models for structural engineers, architects, and contractors working on complex construction projects. These models help project teams visualize how the structural framework fits with the rest of the building and coordinate it against architectural layouts and MEP routing before construction starts.

Structural BIM Services for Construction Projects

The structural system is the backbone of the building. Every other discipline works around it. Where the columns land affects the floor plan. Where the beams run affects the ceiling space for ductwork and piping. When that structural information lives only in 2D drawings, the coordination between trades gets harder and conflicts do not surface until someone is standing in front of them on site.

Structural BIM modeling takes the structural engineer’s design and converts it into a coordinated 3D model. HSE Contractors builds these models in Autodesk Revit so the structural framework can be reviewed against architectural and MEP systems before construction begins. That way, beam penetrations, slab openings, and framing clearances are sorted out in the model instead of through RFIs in the field.

Structural BIM Modeling Scope

The structural BIM model represents the full framing system that supports the building. What gets modeled depends on the structural system and project scope, but typical elements include:

• Structural columns
• Beams and framing systems (steel and concrete)
• Concrete slabs and foundations
• Structural walls and load-bearing elements
• Steel bracing and connection points
• Floor systems and elevated decks
• Precast concrete elements

HSE Contractors models reinforced concrete, structural steel, precast, and hybrid systems. The scope matches whatever the structural engineer has designed.

Structural Detailing and Documentation

Structural BIM models are not just for visualization. They feed directly into the detailing and documentation that contractors and fabricators need during construction. HSE Contractors produces the following from the structural model:

• Structural shop drawings for fabrication and field installation
• Rebar detailing for reinforced concrete structures
• Steel connection details and erection drawings
• Construction documentation derived from the BIM model
• Structural quantity takeoffs for material estimation and procurement

These documents give contractors what they need to plan fabrication sequences, order materials, and coordinate installation with other trades on site. For projects that need steel and concrete shop drawings, our team produces them directly from the structural model.

Structural BIM Coordination

A structural model that does not coordinate with the rest of the building is only half the job. Duct runs need to clear the beams. Pipe risers need to miss columns. Slab openings need to land where the MEP engineer says they will.

HSE Contractors coordinates structural BIM models with architectural and MEP disciplines to catch these conflicts early. We federate the structural model with other discipline models in Navisworks and run clash detection to flag spatial conflicts before they reach the field. The result is fewer RFIs, less rework, and a smoother installation sequence for the trades.

Structural BIM Deliverables

What gets delivered depends on the project scope and what the structural engineer or contractor needs. Deliverables are aligned with client BIM standards and project documentation requirements. Most structural BIM projects include a combination of the following:

• Revit structural BIM models with framing, foundations, and connections
• Structural layout drawings and framing plans
• Structural sections and detail sheets
• Rebar detailing and reinforcement schedules
• Steel connection details and shop drawings
• Structural quantity takeoff reports
• 3D structural models for visualization and coordination

Structural BIM Modeling Process

HSE Contractors follows a structured workflow to build structural BIM models that are accurate, coordinated, and ready for construction use.
The typical process starts with a review of the structural drawings and design documents to confirm the scope, LOD, and deliverable requirements. From there, the structural elements are modeled in Revit with proper families, material assignments, and structural categories. Once the model is built, it is coordinated with architectural and MEP models to check for conflicts at beam penetrations, slab openings, and framing intersections. Quality checks are run against the design documents before the final models and documentation are delivered in the client’s required formats.

Project Types That Use Structural BIM Services

• Commercial office buildings
• High-rise residential and mixed-use towers
• Healthcare and hospital projects
• Industrial and warehouse facilities
• Institutional and government buildings
• Large renovation and retrofit projects
• Data centers

Why HSE Contractors

HSE Contractors has been supporting structural engineers, architects, and contractors on BIM modeling projects across the country for years, with offices in New York City, Boston, Los Angeles, San Francisco, Miami, Tampa, Chicago, Denver, Dallas, and Washington DC.

Project teams pick HSE for structural BIM because the modelers understand how structural systems actually get built. They model with coordination and construction sequencing in mind, not just geometry. The models follow your BIM execution plan, naming conventions, and deliverable formats so the output fits your workflow without extra cleanup.

For teams that need guidance on BIM execution planning and standards before modeling starts, our BIM consulting services handle that side of the process.

FAQ