Architectural BIM Services

• Ability to leverage multiple opportunities with BIM

  ---

• Parametrics family creation, as well as Revit conversion

  ---

• Seamless communication throughout convergence facilities

  ---

• Knowledge sharing of industry best practices

  ---

• Up to date software training

  ---

Contact Us

View All Services

Our Services

CPM Scheduling
Construction Delay Claims
Staff Augmentation
Construction Management Consulting Services
BIM Modeling
Constructability Review
Value Engineering
Construction Management

HSE Contractors is insured by the following professional liability policies, up to $4,000,000 for our clients’ protection:
General Liability.
Workers Comp

Structural BIM Services

Accurate architectural BIM models that support design development, coordination, and construction documentation.

• 3D building models for walls, floors, ceilings, doors, windows, and room layouts
• Documentation and coordination that stay connected to the design model

HSE Contractors develops architectural BIM models using Autodesk Revit so architects and project teams can work with a digital model that represents the building geometry and design intent. These models help teams visualize building design, coordinate systems across disciplines, and produce documentation that stays accurate as the project moves forward.

Architectural BIM Services for Accurate Building Design

Most project teams have run into the same challenge with traditional 2D drawings and fragmented design information. The floor plan says one thing, the section says another, and the door schedule has not been updated since the last revision. When the design lives in disconnected files, every change means chasing updates across dozens of sheets. Things get missed. Errors make it into construction documents.

Architectural BIM modeling solves that by putting the entire building design into a single 3D model. The floor plans, sections, elevations, and schedules all pull from the same source. When the architect moves a wall, the documentation follows automatically. HSE Contractors builds these models so design teams spend their time on the design, not on fixing coordination errors in their drawing sets.

What Our Architectural BIM Services Include

HSE Contractors develops detailed architectural BIM models that support design, coordination, and construction documentation. These services help architects translate design concepts into structured digital models used throughout the project lifecycle. The scope depends on the project, but here is what we typically cover:

• Architectural 3D modeling of building elements such as walls, floors, ceilings, doors, and windows
• Development of BIM models from design drawings and architectural plans
• Conversion of CAD drawings into BIM models
• Existing building modeling for renovation and retrofit projects
• Architectural BIM coordination with structural and MEP models
• Preparation of architectural models aligned with project BIM standards

The final modeling scope depends on the client’s design phase and project requirements. Some projects need a schematic-level model for early design conversations. Others need a fully detailed model that produces construction documents.

Architectural BIM Deliverables

Architectural BIM modeling generates models and documentation that architects and engineers use during design and construction phases. Deliverables vary depending on project scope and BIM requirements. Most architectural BIM projects include a combination of the following:

• Revit BIM models of architectural building components
• Floor plans and layout drawings derived from BIM models
• Reflected ceiling plans and architectural sections
• Door and window schedules generated from the model
• Construction documentation extracted from the BIM model
• 3D architectural visualization models used for coordination and presentations

Deliverables are structured based on client BIM standards and project workflows. If your firm uses specific Revit templates, sheet formats, or family libraries, we work inside them. For projects that need multi-discipline coordination, we run the architectural model through clash detection against structural and MEP models before final delivery.

Our Architectural BIM Modeling Workflow

HSE Contractors follows a structured process to build accurate architectural BIM models:

• Reviewing architectural drawings and project data
• Setting up the BIM project environment and model structure
• Developing architectural elements such as walls, floors, and openings
• Coordinating architectural models with structural and MEP models
• Performing quality checks and design verification
• Delivering the final BIM model and documentation

This workflow keeps the model consistent with the design intent and aligned with project requirements from start to finish.

Structural BIM Deliverables

What gets delivered depends on the project scope and what the structural engineer or contractor needs. Deliverables are aligned with client BIM standards and project documentation requirements. Most structural BIM projects include a combination of the following:

• Revit structural BIM models with framing, foundations, and connections
• Structural layout drawings and framing plans
• Structural sections and detail sheets
• Rebar detailing and reinforcement schedules
• Steel connection details and shop drawings
• Structural quantity takeoff reports
• 3D structural models for visualization and coordination

LOD and BIM Model Development

Architectural BIM models can be developed at different Levels of Development depending on project requirements and the design phase. The required LOD is typically defined during project planning.

• LOD 200 covers general building geometry and layout
• LOD 300 is a detailed architectural modeling used for coordination
• LOD 350 supports coordination between architectural and building systems
• LOD 400 is construction-level modeling when required

Selecting the right LOD makes sure the BIM model supports design coordination and construction documentation without over-modeling where it is not needed. We work through this during scoping. For teams that need help setting up BIM standards or execution plans before modeling starts, our BIM consulting services cover that side.

Where Architectural BIM Services Are Used

• Commercial office buildings
• Healthcare and hospital design
• Hospitality and hotel projects
• High-rise residential and mixed-use
• Institutional and government buildings
• Renovation and retrofit projects
• Campus and education facilities

Why HSE Contractors?

HSE Contractors has been delivering BIM modeling and construction consulting services for years, with offices in New York City, Boston, Los Angeles, San Francisco, Miami, Tampa, Chicago, Denver, Dallas, and Washington DC.

Project teams choose HSE for architectural BIM because:

• Experience supporting architects, engineers, and construction teams across project types
• Revit-based architectural BIM modeling workflows
• Coordination with structural and MEP BIM models under the same team
• Ability to align with client BIM standards and BIM execution plans
• Consistent communication and reliable project delivery

Frequently Asked Questions