BIM Services in New York

New York construction runs on coordination. Between tight job sites, dense MEP systems, aging building stock, and DOB requirements, there is very little margin for field rework on most NYC projects. HSE Contractors operates from our Manhattan office and supports BIM modeling, clash detection, and consulting for projects across all five boroughs. Full service details are on our BIM Modeling Services and BIM Consulting Services pages.

BIM Modeling Support for New York Projects

HSE provides BIM modeling services in New York for projects that need construction-ready Revit models, multi-trade coordination, and clash detection. Here is what that looks like on a typical New York project.

Multi-discipline Revit modeling

We build architectural, structural, and MEP models in Revit at LOD 200 through LOD 400. Most NYC contractors working on commercial and high-rise projects need LOD 350 or LOD 400 MEP coordination to avoid clashes in mechanical rooms, shafts, and utility corridors.

Clash detection and coordination

We federate discipline models in Navisworks and run clash detection to flag conflicts between structural, mechanical, plumbing, electrical, and fire protection systems. Coordination reports and issue logs are produced for your team to resolve before installation begins.

Scan to BIM for renovations

For renovation and adaptive reuse projects in New York, we convert laser scan data into accurate 3D models of existing conditions. This gives your design and coordination team a reliable starting point instead of guessing from old drawings that may not match what is actually in the building.

4D scheduling tied to BIM

On phased or occupied-building projects in New York, we link the BIM model to the construction schedule so your team can visualize sequencing, plan logistics around tight site conditions, and coordinate trades floor by floor.

Let's Get Started

BIM Consulting Support for New York Projects

For New York projects that need BIM governance, standards, or workflow setup, HSE provides BIM consulting support.

BIM Execution Plans for NYC projects

We write project-specific BEPs that define model ownership, LOD requirements, coordination protocols, file naming, and deliverable schedules. On multi-firm NYC projects with several design and trade teams producing models simultaneously, the BEP is what keeps everyone working to the same standard.

Coordination workflow setup

e set up BIM coordination workflows, including meeting cadence, clash detection cycles, model exchange schedules, and issue tracking. On large New York projects with dozens of subcontractors, having this structure in place before coordination starts saves weeks of back and forth later.

BIM management

On projects that need a dedicated resource to oversee model quality, coordination schedules, and deliverable tracking, HSE provides BIM management as part of our consulting services.

Request a BIM Consultation

A BIM Firm That Understands Construction

Most BIM companies produce models. HSE produces models and understands what happens after the model leaves the screen.

Our team has worked on 425 Park Avenue and the WeWork/WeLive conversion at 110 Wall Street, two of the most complex projects in Manhattan in recent years
HSE has a registered office at 1324 Lexington Avenue, Suite 300, Manhattan, serving projects across New York City and the metro area
BIM, CPM scheduling, and construction consulting all come from the same firm, so the model, the schedule, and the project plan stay connected
Our modelers have construction backgrounds and understand trade sequencing, field conditions, and what contractors actually need from a coordination model
We work within your project standards, BEP, and naming conventions so the deliverables fit your workflow from day one

Business people having consultation about wind

Project Types We Support in New York

HSE has been involved in New York construction for years. Our CPM scheduling team worked on 425 Park Avenue, one of the most high-profile office tower projects in Manhattan, and the WeWork/WeLive renovation at 110 Wall Street, a 28-floor occupied building conversion. Our BIM and scheduling teams support projects across these building types in the New York metro area.

Commercial office towers and mixed-use developments in Manhattan and Brooklyn
High-rise residential and multifamily projects
Healthcare facilities and hospital renovations
Hotel and hospitality construction
Occupied building renovations and adaptive reuse
Public sector and infrastructure projects
Data centers and mission-critical facilities

BIM Services in New York FAQs

Does HSE have an office in New York?

Yes. HSE has a registered office at 1324 Lexington Avenue, Suite 300, New York, NY 10128, and a location in Brooklyn. We serve projects across all five boroughs and the surrounding metro area.

What BIM services does HSE provide in New York?

HSE provides BIM modeling (Revit, clash detection, Scan to BIM, 4D scheduling) and BIM consulting (BEP development, standards, workflow implementation, BIM management). For the full scope of each service, visit our BIM Modeling Services and BIM Consulting Services pages.

Is BIM required on New York City projects?

BIM is not legally mandated by the NYC DOB for all projects. But on most commercial, high-rise, healthcare, and public sector projects in New York, BIM has become a standard requirement from owners and GCs because of the coordination complexity involved in building in this city.

What LOD do New York contractors typically need?

Most NYC contractors working on commercial and high-rise projects need LOD 350 or LOD 400 for MEP coordination. That level of detail is necessary to resolve clashes in tight ceiling plenums, shafts, and mechanical rooms that are common on New York buildings.

Can HSE support renovation projects with Scan to BIM in New York?

Yes. A large number of New York projects involve older buildings with incomplete or missing documentation. HSE provides Scan to BIM services that convert laser scan data into accurate 3D models of existing conditions so design and coordination can proceed from a reliable baseline.

Does HSE handle both BIM and CPM scheduling on New York projects?

Yes. HSE provides both BIM and CPM scheduling services. On New York projects, we tie the BIM model to the construction schedule through 4D BIM so coordination, sequencing, and logistics planning are all connected. Visit our CPM Scheduling Services page for more on scheduling.

What is the difference between 3D, 4D, and 5D BIM?

3D BIM is a geometric building model. 4D adds scheduling data so teams can simulate the construction sequence over time. 5D adds cost information for quantity takeoffs, budget tracking, and cost forecasting. HSE delivers all three.

Customers Reviews

What Our Clients Say

Tim Kramer Walt Disney World Resort

“Working with HSE was a great experience, a very professional and knowledgeable staff was provided and the confidence and quality in the deliverable was very high. You guys did an excellent job. Thank you again for your services.”

Landy Freiley Pogue Construction

“HSE team has done a phenomenal job and I could not ask for better. Thank you for all of your hard work”

Jay L . Titus Jr. The Walsh Group

“Your boys did good! I put in the good word for you back east. Keep it up.”

Dustin Crabtree Turner Construction Company

“Alex, You are doing a great job for this project! Thank you for taking the time today to walk us through your efforts, It really is a pleasure to work with you! Thank you!”

Dan Hudnall Williams Construction

“We have been informed by the client that schedule updates for the Civil and Mechanical projects are no longer needed. It has been a pleasure working with you during this project, Thank You for your efforts.”

Barry Bickerstaff Hazen and Sawyer

“HSE has done a great job of training our team on how to better manage our project’s schedules. The training was very helpful and it went smoothly. We appreciate your help and we are looking forward to receiving our training certificate from HSE.”

Get BIM Support for Your New York Project

HSE Contractors supports construction teams across New York City with BIM modeling, coordination, and consulting. If your project needs models built, coordination set up, or BIM governance in place, reach out to our Manhattan office. Contact Us Today

(646) 202-9213