BIM Modeling Services

Q: What do BIM modeling services include?

BIM modeling services include producing accurate 3D models (often in Revit) with geometry and data attributes. Deliverables may include discipline models, federated coordination models, clash coordination support outputs, quantities, and record model updates depending on scope.

Q: What level of development (LOD) do you provide?

We support LOD 200 through LOD 400. LOD selection is aligned to your project needs such as coordination, constructability, estimating quantities, shop drawing support, or as-builts.

Q: Do you provide clash detection?

We provide clash coordination support by federating models, running clash tests (Navisworks), and issuing clear reports and issue logs to help resolve conflicts before installation.

Q: Can you model from 2D drawings?

Yes. We convert 2D drawings and specifications into coordinated 3D BIM models, following project standards and required deliverables.

Q: Do you offer BIM outsourcing services?

Yes. Our BIM outsourcing services provide scalable production capacity for Revit modeling, federated coordination models, and coordination-ready outputs through staff augmentation or fixed-scope deliverables.

Q: How long does BIM modeling take?

Timelines vary by trade complexity, LOD, and deliverables. After reviewing drawings and requirements, we provide a schedule with milestones for model setup, coordination cycles, and final outputs.

Q: How much do BIM modeling services cost?

Pricing depends on discipline scope, LOD requirements, coordination cycles, and turnaround. After reviewing documents, we provide a proposal with scope, deliverables, and schedule.

BIM modeling services are the production of construction-ready digital building models created from your drawings, specifications, and existing conditions. HSE Contractors provides 3D BIM modeling services focused on execution and deliverables only, including Revit-based modeling, LOD 200–400 development, federated architectural/structural/MEP models, clash coordination support outputs, and shop/fabrication-ready models where required.

Construction-Ready 3D Revit Models
LOD 200–400 Modeling Deliverables
Federated Coordination + Clash Reports
BIM Outsourcing Services for Peak Demand

View Services

GET A FREE QUOTE!

What BIM Modeling Services Include

BIM modeling services focus on creating accurate, buildable models that construction teams can use to coordinate trades, validate layouts, and produce reliable deliverables. HSE Contractors provides modeling outputs that are aligned to construction execution, including:

3D Revit models built from drawings, specs, and submittals
LOD 200–400 modeling based on project phase and use-case
Federated coordination models (architectural + structural + MEP)
Clash coordination support with issue tracking and reports (Navisworks)
Shop drawing / fabrication-ready modeling support where required
As-built modeling and record model updates
Scan to BIM for existing conditions (where provided)

3D BIM Modeling Services by Discipline

We deliver discipline-specific models that match real construction needs and trade coordination workflows:

Architectural Modeling: Rooms, finishes, ceiling systems, doors/frames/hardware, architectural details
Structural Modeling: Concrete/steel framing, embeds, openings, foundations, structural coordination
MEP Modeling: HVAC duct/piping, plumbing, fire protection, electrical systems and equipment layouts
Civil / Site Modeling: Site utilities, grading references, coordination for underground and site conflicts

LOD 200 to LOD 400 Modeling

LOD defines how detailed and reliable the model elements are for construction use. We align LOD to your project phase and deliverables, then document what is included.

LOD Level	Best Use	Typical Deliverables
LOD 200	Early coordination / layout validation	Generalized systems, approximate sizes/locations, preliminary coordination model
LOD 300	Construction coordination	Accurate sizes/locations, major equipment, coordinated routing, clash-ready federated model
LOD 350	Trade-to-trade interface clarity	Connections/support intent where required for coordination, improved conflict resolution
LOD 400	Fabrication support (when specified)	Fabrication-level detail where applicable, shop/fabrication-ready model elements per scope

Note: LOD selection is always tied to your required outputs (coordination, clash resolution, shop drawing support, estimating quantities, or record models).

BIM Modeling Outsourcing Services

If your team needs extra modeling capacity without hiring overhead, our BIM outsourcing services provide scalable production support while keeping your deliverables consistent and on schedule. This section is intentionally focused on execution (not management).

Staff augmentation for BIM production: add modelers quickly for peaks in workload
Project-based outsourcing: defined scope, deliverables, and turnaround
Standards-based output: we follow your naming conventions, templates, and BEP requirements
Coordination-ready models: federated models prepared for clash tests and issue logs
Deliverable formats: RVT/NWD/NWC/IFC/PDF as required
Deliverables kickoff checklist: confirm LOD, model standards, file formats (RVT/NWC/NWD/IFC), coordination cycle count, and required outputs (reports/logs)

If you also need strategy, standards creation, or governance support, see our BIM Consulting Services.

Industries We Support with BIM Modeling

Healthcare
Hotels & hospitality
Multifamily & mixed-use
Industrial & logistics
Data centers
Water & civil infrastructure
Federal & municipal projects

4D BIM Model of JW Marriott Hotel

Watch this video on YouTube

BIM 3D Plumbing Example

Watch this video on YouTube

5D BIM Example

Watch this video on YouTube

5D BIM deliverables can include model-based quantities and cost attributes (where provided), aligned to your project’s WBS and estimating structure. Deliverables may include quantity takeoffs, cost-coded model elements, and export-ready reports as required by scope.

FAQs About BIM Modeling Services

What do BIM modeling services include?

What level of development (LOD) do you provide?

Do you provide clash detection?

Can you model from 2D drawings?

Do you offer BIM outsourcing services?

How long does BIM modeling take?

How much do BIM modeling services cost?

Get Started with BIM Modeling Services

HSE Contractors delivers scalable, accurate, execution-focused BIM modeling services across the USA and beyond. Share your drawings and requirements, and we will respond with a clear scope, deliverables, and turnaround.